Comments on: Setting up a High Availability NAS/SAN using Openfiler http://www.easyreadarticles.com/applications/setting-up-a-high-availability-nassan-using-openfiler/#utm_source=articlesfeed&utm_medium=articlesfeed&utm_campaign=articlesfeed Best Technical Writing Online , Easy Reading Books and much more! Tue, 17 May 2011 18:56:42 +0000 hourly 1 http://wordpress.org/?v= By: New server deployment - sanity check? http://www.easyreadarticles.com/applications/setting-up-a-high-availability-nassan-using-openfiler/comment-page-1/#comment-113 New server deployment - sanity check? Sat, 29 Jan 2011 15:32:07 +0000 http://www.easyreadarticles.com/?p=150#comment-113 [...] just using the 2950s for SAN then you can install openfiler and set that to mirror between sites Setting up a High Availability NAS/SAN using Openfiler | Easy to Read Articles Yes, with the RODC as they should still be able to logon, the big thing will be if they have [...] [...] just using the 2950s for SAN then you can install openfiler and set that to mirror between sites Setting up a High Availability NAS/SAN using Openfiler | Easy to Read Articles Yes, with the RODC as they should still be able to logon, the big thing will be if they have [...]

]]> By: Momo http://www.easyreadarticles.com/applications/setting-up-a-high-availability-nassan-using-openfiler/comment-page-1/#comment-63 Momo Thu, 27 May 2010 00:36:52 +0000 http://www.easyreadarticles.com/?p=150#comment-63 If you get an error during the creation of a LVM volume, similar to to: Found duplicate PV m8M0tNOCx83QS53D07kybsEDl8oNt4X6: using /dev/sdb1 not /dev/drbd0 It is using the raw device instead of the DRBD'd device, to fix this edit /etc/lvm/lvm.conf and change the filter line to: <blockquote>filter = [ "a|/dev/drbd*|", "r/.*/" ]</blockquote> If you get an error during the creation of a LVM volume, similar to to:

Found duplicate PV m8M0tNOCx83QS53D07kybsEDl8oNt4X6: using /dev/sdb1 not /dev/drbd0

It is using the raw device instead of the DRBD’d device, to fix this edit /etc/lvm/lvm.conf and change the filter line to:

filter = [ "a|/dev/drbd*|", "r/.*/" ]

]]> By: Setting up a High Availability NAS/SAN using Openfiler - Troubleshooting Guides http://www.easyreadarticles.com/applications/setting-up-a-high-availability-nassan-using-openfiler/comment-page-1/#comment-15 Setting up a High Availability NAS/SAN using Openfiler - Troubleshooting Guides Mon, 22 Jun 2009 05:52:32 +0000 http://www.easyreadarticles.com/?p=150#comment-15 [...] up a High Availability NAS/SAN using Openfiler Original Article Setting up a High Availability NAS/SAN using Openfiler This HowTo focuses on setting up the OpenSource NAS/SAN Openfiler as a High Availability storage. [...] [...] up a High Availability NAS/SAN using Openfiler Original Article Setting up a High Availability NAS/SAN using Openfiler This HowTo focuses on setting up the OpenSource NAS/SAN Openfiler as a High Availability storage. [...]

]]>